Search Product
Our Categories
Your Cart
Your order qualifies for free shipping!
Your shopping bag is currently empty
Continue Shopping
BEST SELLER
RUSHFPV Cherry Antenna MMCX-JW LHCP Sale
Original price was: $24.99.$12.50Current price is: $12.50.RUSHFPV Cherry Antenna MMCX-J Straight MMCX Connector LHCP For Cheap
Original price was: $24.99.$12.50Current price is: $12.50.EMAX Avan Mini 3 inch Propeller 3×2.4×3 6xCCW 6xCW 3 Sets For Sale
Original price was: $4.49.$2.25Current price is: $2.25.GEPRC -Mark4 5 Analog Freestyle Frame Cheap
Original price was: $55.99.$28.00Current price is: $28.00.Insta360 Bullet Time Accessory Bundle For Cheap
Original price was: $55.00.$27.50Current price is: $27.50.Runcam Phoenix 2 Joshua Bardwell Edition – 1000TVL CMOS FPV Camera For Discount
Original price was: $32.99.$16.50Current price is: $16.50.ETHIX SD CARD HOLDER For Sale
Original price was: $7.95.$3.98Current price is: $3.98.50%
Holybro Pixhawk Jetson Baseboard Bundle – Autopilot & AI Processing Hot on Sale
Original price was: $419.00.$209.50Current price is: $209.50.
In Stock
Description
Holybro Pixhawk Jetson Baseboard Bundle
Description
The Holybro Pixhawk Jetson Baseboard is based on the Pixhawk Autopilot Bus open source specification and the NVIDIA Jetson Orin NX Nano Carrier Board. The Pixhawk Autopilot Bus (PAB) Form Factor enables this to be used with any PAB flight controller such as the Pixhawk 6X
Feature
- Combines the power of Pixhawk & Nvidia Jetson in a single board
-
- Nvidia Jetson & Pixhawk connected via UART, CAN, and ethernet switch
-
- Pixhawk Autopilot Bus (PAB) Form Factor
-
- Compatible with Jetson Orin NX & Orin Nano
-
- 2x M.@ key for WiFI Bluetooth & NVMe SSD
-
Pixhawk 6X (ICM-45686)
Processors & Sensors
- FMU Processor: STM32H753
- 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
-
-
- IO Processor: STM32F103
- 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
-
-
- On-board sensors (Shipping Currently, Rev8)
- Accel Gyro: 3x ICM-45686 (with BalancedGyro™ Technology)
-
- Barometer: ICP20100 & BMP388
-
- Mag: BMM150
-
-
Baseboard Port & Connection
Jetson Connectors
- 2x Gigabit Ethernet port
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
- Ethernet Switch powered by circuit as the Pixhawk
-
-
- 8-pin JST-GH
-
- RJ45
-
-
- 2x MIPI CSI Camera Inputs
- 4 Lanes each
-
- 22-Pin Raspberry Pi Cam FFC
-
-
- 2x USB 3.0 Host Port
- USB A
-
- 5A Current Limit
-
-
- 2x USB 2.0 Host Port
- 5-Pin JST-GH
-
- 0A Current Limit
-
-
- USB 2.0 for Programming debugging
- USB-C
-
-
- 2 Key M 2242 for NVMe SSD
- PCIEx4
-
-
- 2 Key E 2230 for WiFi BT
- PCIEx2
-
- USB
-
- UART
-
- I2S
-
-
- Mini HDMI Out
-
- 4x GPIO
- 6-pin JST-GH
-
-
- CAN Port
- Connected to Autopilot’s CAN2 (4 Pin JST-GH)
-
-
- SPI Port
- 7-Pin JST-GH
-
-
- I2C Port
- 4-Pin JST-GH
-
-
- I2S Port
- 7-Pin JST-GH
-
-
- 2x UART Port
- 1 for debug
-
- 1 connected to Autopilot’s telem2
-
-
- Fan Power Port
-
- IIM42652 IMU
-
- Input Power
- XT30 Connector
-
- Voltage Rating: 7-21V (3S-4S)
-
- Separate input power circuits than the Autopilot to ensure flight safety
-
- Holybro UBEC 12A (3-14S) can be used for application above 4S
-
-
Note: The Pixhawk Jetson Baseboard onboard BEC is only rated for 7-21V (3S-4S). Using the external UBEC 12A (3-14S) can provides redundancy and easier replacement in case of BEC failure.
-
-
- Power Requirements
- 8V 3A Minimum
-
- Depends on Usage and Peripherals
-
-
Autopilot Connectors
- Pixhawk Autopilot Bus Interface
- 100 Pin Hirose DF40
-
- 50 Pin Hirose DF40
-
-
- Redundant Digital Power Module Inputs
- I2C Power Monitor Support
-
- 2x – 6 Pin Molex CLIK-Mate
-
- Power Path Selector w Overvoltage Protection
-
-
- Voltage Ratings:
- Max input voltage: 6V
-
- USB Power Input: 4.75~5.25V
-
-
- Full GPS Plus Safety Switch Port
- 10-Pin JST-GH
-
-
- Secondary (GPS2) Port
- 6-pin JST-GH
-
-
- 2x CAN Ports
- 4 Pin JST-GH
-
-
- 3x Telemetry Ports with Flow Control
- 2x 6-Pin JST-GH
-
- 1 is connected to Jetson’s UART1 Port
-
-
- 16 PWM Outputs
- 2x 10-Pin JST-GH
-
-
- UART4 & I2C Port
- 6-Pin JST-GH
-
-
- 2x Gigabit Ethernet port
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
-
- 8-pin JST-GH
-
- RJ45
-
-
- AD & IO
- 8-Pin JST-GH
-
-
- USB 2.0
- USB-C
-
- 4-pin JST-GH
-
-
- DSM Input
- 3-pin JST-ZH 1.5mm Pitch
-
-
- RC in
- PPM SBUS
-
- 5-pin JST-GH
-
-
- SPI Port
- External Sensor Bus (SPI5
-
- 11-Pin JST-GH
-
-
- 2x Debug Port
- 1 for FMU
-
- 1 for IO
-
- 10-Pin JST-SH
-
-
- Dimensions (Without Jetson and Flight Controller Module)
- 126x80x38mm
-
-
- Weight
- With Jetson, Heatsink, Flight Controller, M.2 SSD, M.2 Wi-Fi Module 203.2g
-
-
UBEC-12A Specifications
- Input voltage: 3~14S (XT30)
-
- Output voltage: 6.0V 7.2V 8.0V 9.2V (recommend 7.2V if supplying power to Jetson Board)
-
- Output Current
- Continuous: 12A
-
- Burst: 24A
-
-
- Size: 48×33.6×16.3 mm
-
- Weight: 47.8g
-
Reference Wiring Diagram
Reference Links
- Full Pinout
-
- Dimension & Weight
-
- Flashing Guide
-
- CAN Setup
-
- CSI Camera Setup
-
- MAVLINK Bridge
-
- Other Reference Link
-
- CAD File Download
-
Package Includes
SKU20281 SKU20283 SKU20339 SKU20340
-
Pixhawk 6X (ICM-45686) Flight Controller Module
-
- Pixhawk Jetson Orin Baseboard
-
- Nvidia Orin NX (16GB RAM) Nvidia Orin Nano (4GB RAM)
-
- w Heat Sink & Fan
-
- Includes the following:
- SSD: Samsung PM9B1 PCIe 4.0 NVMe 512GB
-
- Wi-Fi & Bluetooth Module: Intel 8265NGW AC Dual Band and Realtek RTL8B22CE
-
- Camera: IMX219-200
-
Description
The Holybro Pixhawk Jetson Baseboard is based on the Pixhawk Autopilot Bus open source specification and the NVIDIA Jetson Orin NX Nano Carrier Board. The Pixhawk Autopilot Bus (PAB) Form Factor enables this to be used with any PAB flight controller such as the Pixhawk 6X
Feature
- Combines the power of Pixhawk & Nvidia Jetson in a single board
-
- Nvidia Jetson & Pixhawk connected via UART, CAN, and ethernet switch
-
- Pixhawk Autopilot Bus (PAB) Form Factor
-
- Compatible with Jetson Orin NX & Orin Nano
-
- 2x M.@ key for WiFI Bluetooth & NVMe SSD
-
Pixhawk 6X (ICM-45686)
Processors & Sensors
- FMU Processor: STM32H753
- 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
-
-
- IO Processor: STM32F103
- 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
-
-
- On-board sensors (Shipping Currently, Rev8)
- Accel Gyro: 3x ICM-45686 (with BalancedGyro™ Technology)
-
- Barometer: ICP20100 & BMP388
-
- Mag: BMM150
-
-
Baseboard Port & Connection
Jetson Connectors
- 2x Gigabit Ethernet port
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
- Ethernet Switch powered by circuit as the Pixhawk
-
-
- 8-pin JST-GH
-
- RJ45
-
-
- 2x MIPI CSI Camera Inputs
- 4 Lanes each
-
- 22-Pin Raspberry Pi Cam FFC
-
-
- 2x USB 3.0 Host Port
- USB A
-
- 5A Current Limit
-
-
- 2x USB 2.0 Host Port
- 5-Pin JST-GH
-
- 0A Current Limit
-
-
- USB 2.0 for Programming debugging
- USB-C
-
-
- 2 Key M 2242 for NVMe SSD
- PCIEx4
-
-
- 2 Key E 2230 for WiFi BT
- PCIEx2
-
- USB
-
- UART
-
- I2S
-
-
- Mini HDMI Out
-
- 4x GPIO
- 6-pin JST-GH
-
-
- CAN Port
- Connected to Autopilot’s CAN2 (4 Pin JST-GH)
-
-
- SPI Port
- 7-Pin JST-GH
-
-
- I2C Port
- 4-Pin JST-GH
-
-
- I2S Port
- 7-Pin JST-GH
-
-
- 2x UART Port
- 1 for debug
-
- 1 connected to Autopilot’s telem2
-
-
- Fan Power Port
-
- IIM42652 IMU
-
- Input Power
- XT30 Connector
-
- Voltage Rating: 7-21V (3S-4S)
-
- Separate input power circuits than the Autopilot to ensure flight safety
-
- Holybro UBEC 12A (3-14S) can be used for application above 4S
-
-
Note: The Pixhawk Jetson Baseboard onboard BEC is only rated for 7-21V (3S-4S). Using the external UBEC 12A (3-14S) can provides redundancy and easier replacement in case of BEC failure.
-
-
- Power Requirements
- 8V 3A Minimum
-
- Depends on Usage and Peripherals
-
-
Autopilot Connectors
- Pixhawk Autopilot Bus Interface
- 100 Pin Hirose DF40
-
- 50 Pin Hirose DF40
-
-
- Redundant Digital Power Module Inputs
- I2C Power Monitor Support
-
- 2x – 6 Pin Molex CLIK-Mate
-
- Power Path Selector w Overvoltage Protection
-
-
- Voltage Ratings:
- Max input voltage: 6V
-
- USB Power Input: 4.75~5.25V
-
-
- Full GPS Plus Safety Switch Port
- 10-Pin JST-GH
-
-
- Secondary (GPS2) Port
- 6-pin JST-GH
-
-
- 2x CAN Ports
- 4 Pin JST-GH
-
-
- 3x Telemetry Ports with Flow Control
- 2x 6-Pin JST-GH
-
- 1 is connected to Jetson’s UART1 Port
-
-
- 16 PWM Outputs
- 2x 10-Pin JST-GH
-
-
- UART4 & I2C Port
- 6-Pin JST-GH
-
-
- 2x Gigabit Ethernet port
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
-
- 8-pin JST-GH
-
- RJ45
-
-
- AD & IO
- 8-Pin JST-GH
-
-
- USB 2.0
- USB-C
-
- 4-pin JST-GH
-
-
- DSM Input
- 3-pin JST-ZH 1.5mm Pitch
-
-
- RC in
- PPM SBUS
-
- 5-pin JST-GH
-
-
- SPI Port
- External Sensor Bus (SPI5
-
- 11-Pin JST-GH
-
-
- 2x Debug Port
- 1 for FMU
-
- 1 for IO
-
- 10-Pin JST-SH
-
-
- Dimensions (Without Jetson and Flight Controller Module)
- 126x80x38mm
-
-
- Weight
- With Jetson, Heatsink, Flight Controller, M.2 SSD, M.2 Wi-Fi Module 203.2g
-
-
UBEC-12A Specifications
- Input voltage: 3~14S (XT30)
-
- Output voltage: 6.0V 7.2V 8.0V 9.2V (recommend 7.2V if supplying power to Jetson Board)
-
- Output Current
- Continuous: 12A
-
- Burst: 24A
-
-
- Size: 48×33.6×16.3 mm
-
- Weight: 47.8g
-
Reference Wiring Diagram
Reference Links
- Full Pinout
-
- Dimension & Weight
-
- Flashing Guide
-
- CAN Setup
-
- CSI Camera Setup
-
- MAVLINK Bridge
-
- Other Reference Link
-
- CAD File Download
-
Package Includes
SKU20281 SKU20283 SKU20339 SKU20340
-
Pixhawk 6X (ICM-45686) Flight Controller Module
-
- Pixhawk Jetson Orin Baseboard
-
- Nvidia Orin NX (16GB RAM) Nvidia Orin Nano (4GB RAM)
-
- w Heat Sink & Fan
-
- Includes the following:
- SSD: Samsung PM9B1 PCIe 4.0 NVMe 512GB
-
- Wi-Fi & Bluetooth Module: Intel 8265NGW AC Dual Band and Realtek RTL8B22CE
-
- Camera: IMX219-200
-
- Combines the power of Pixhawk & Nvidia Jetson in a single board
-
- Nvidia Jetson & Pixhawk connected via UART, CAN, and ethernet switch
-
- Pixhawk Autopilot Bus (PAB) Form Factor
-
- Compatible with Jetson Orin NX & Orin Nano
-
- 2x M.@ key for WiFI Bluetooth & NVMe SSD
-
Pixhawk 6X (ICM-45686)
Processors & Sensors
- FMU Processor: STM32H753
- 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
-
-
- IO Processor: STM32F103
- 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
-
-
- On-board sensors (Shipping Currently, Rev8)
- Accel Gyro: 3x ICM-45686 (with BalancedGyro™ Technology)
-
- Barometer: ICP20100 & BMP388
-
- Mag: BMM150
-
-
Baseboard Port & Connection
Jetson Connectors
- 2x Gigabit Ethernet port
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
- Ethernet Switch powered by circuit as the Pixhawk
-
-
- 8-pin JST-GH
-
- RJ45
-
-
- 2x MIPI CSI Camera Inputs
- 4 Lanes each
-
- 22-Pin Raspberry Pi Cam FFC
-
-
- 2x USB 3.0 Host Port
- USB A
-
- 5A Current Limit
-
-
- 2x USB 2.0 Host Port
- 5-Pin JST-GH
-
- 0A Current Limit
-
-
- USB 2.0 for Programming debugging
- USB-C
-
-
- 2 Key M 2242 for NVMe SSD
- PCIEx4
-
-
- 2 Key E 2230 for WiFi BT
- PCIEx2
-
- USB
-
- UART
-
- I2S
-
-
- Mini HDMI Out
-
- 4x GPIO
- 6-pin JST-GH
-
-
- CAN Port
- Connected to Autopilot’s CAN2 (4 Pin JST-GH)
-
-
- SPI Port
- 7-Pin JST-GH
-
-
- I2C Port
- 4-Pin JST-GH
-
-
- I2S Port
- 7-Pin JST-GH
-
-
- 2x UART Port
- 1 for debug
-
- 1 connected to Autopilot’s telem2
-
-
- Fan Power Port
-
- IIM42652 IMU
-
- Input Power
- XT30 Connector
-
- Voltage Rating: 7-21V (3S-4S)
-
- Separate input power circuits than the Autopilot to ensure flight safety
-
- Holybro UBEC 12A (3-14S) can be used for application above 4S
-
-
Note: The Pixhawk Jetson Baseboard onboard BEC is only rated for 7-21V (3S-4S). Using the external UBEC 12A (3-14S) can provides redundancy and easier replacement in case of BEC failure.
-
-
- Power Requirements
- 8V 3A Minimum
-
- Depends on Usage and Peripherals
-
-
Autopilot Connectors
- Pixhawk Autopilot Bus Interface
- 100 Pin Hirose DF40
-
- 50 Pin Hirose DF40
-
-
- Redundant Digital Power Module Inputs
- I2C Power Monitor Support
-
- 2x – 6 Pin Molex CLIK-Mate
-
- Power Path Selector w Overvoltage Protection
-
-
- Voltage Ratings:
- Max input voltage: 6V
-
- USB Power Input: 4.75~5.25V
-
-
- Full GPS Plus Safety Switch Port
- 10-Pin JST-GH
-
-
- Secondary (GPS2) Port
- 6-pin JST-GH
-
-
- 2x CAN Ports
- 4 Pin JST-GH
-
-
- 3x Telemetry Ports with Flow Control
- 2x 6-Pin JST-GH
-
- 1 is connected to Jetson’s UART1 Port
-
-
- 16 PWM Outputs
- 2x 10-Pin JST-GH
-
-
- UART4 & I2C Port
- 6-Pin JST-GH
-
-
- 2x Gigabit Ethernet port
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
-
- 8-pin JST-GH
-
- RJ45
-
-
- AD & IO
- 8-Pin JST-GH
-
-
- USB 2.0
- USB-C
-
- 4-pin JST-GH
-
-
- DSM Input
- 3-pin JST-ZH 1.5mm Pitch
-
-
- RC in
- PPM SBUS
-
- 5-pin JST-GH
-
-
- SPI Port
- External Sensor Bus (SPI5
-
- 11-Pin JST-GH
-
-
- 2x Debug Port
- 1 for FMU
-
- 1 for IO
-
- 10-Pin JST-SH
-
-
- Dimensions (Without Jetson and Flight Controller Module)
- 126x80x38mm
-
-
- Weight
- With Jetson, Heatsink, Flight Controller, M.2 SSD, M.2 Wi-Fi Module 203.2g
-
-
UBEC-12A Specifications
- Input voltage: 3~14S (XT30)
-
- Output voltage: 6.0V 7.2V 8.0V 9.2V (recommend 7.2V if supplying power to Jetson Board)
-
- Output Current
- Continuous: 12A
-
- Burst: 24A
-
-
- Size: 48×33.6×16.3 mm
-
- Weight: 47.8g
-
Reference Wiring Diagram
Reference Links
- Full Pinout
-
- Dimension & Weight
-
- Flashing Guide
-
- CAN Setup
-
- CSI Camera Setup
-
- MAVLINK Bridge
-
- Other Reference Link
-
- CAD File Download
-
Package Includes
SKU20281 SKU20283 SKU20339 SKU20340
-
Pixhawk 6X (ICM-45686) Flight Controller Module
-
- Pixhawk Jetson Orin Baseboard
-
- Nvidia Orin NX (16GB RAM) Nvidia Orin Nano (4GB RAM)
-
- w Heat Sink & Fan
-
- Includes the following:
- SSD: Samsung PM9B1 PCIe 4.0 NVMe 512GB
-
- Wi-Fi & Bluetooth Module: Intel 8265NGW AC Dual Band and Realtek RTL8B22CE
-
- Camera: IMX219-200
-
- FMU Processor: STM32H753
- 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
-
- IO Processor: STM32F103
- 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
-
- On-board sensors (Shipping Currently, Rev8)
- Accel Gyro: 3x ICM-45686 (with BalancedGyro™ Technology)
- Barometer: ICP20100 & BMP388
- Mag: BMM150
-
-
- 2x Gigabit Ethernet port
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
- Ethernet Switch powered by circuit as the Pixhawk
-
- 8-pin JST-GH
- RJ45
-
- 2x MIPI CSI Camera Inputs
- 4 Lanes each
- 22-Pin Raspberry Pi Cam FFC
-
- 2x USB 3.0 Host Port
- USB A
- 5A Current Limit
-
- 2x USB 2.0 Host Port
- 5-Pin JST-GH
- 0A Current Limit
-
- USB 2.0 for Programming debugging
- USB-C
-
- 2 Key M 2242 for NVMe SSD
- PCIEx4
-
- 2 Key E 2230 for WiFi BT
- PCIEx2
- USB
- UART
- I2S
-
- Mini HDMI Out
- 4x GPIO
- 6-pin JST-GH
-
- CAN Port
- Connected to Autopilot’s CAN2 (4 Pin JST-GH)
-
- SPI Port
- 7-Pin JST-GH
-
- I2C Port
- 4-Pin JST-GH
-
- I2S Port
- 7-Pin JST-GH
-
- 2x UART Port
- 1 for debug
- 1 connected to Autopilot’s telem2
-
- Fan Power Port
- IIM42652 IMU
- Input Power
- XT30 Connector
- Voltage Rating: 7-21V (3S-4S)
- Separate input power circuits than the Autopilot to ensure flight safety
- Holybro UBEC 12A (3-14S) can be used for application above 4S
-
Note: The Pixhawk Jetson Baseboard onboard BEC is only rated for 7-21V (3S-4S). Using the external UBEC 12A (3-14S) can provides redundancy and easier replacement in case of BEC failure.
- Power Requirements
- 8V 3A Minimum
- Depends on Usage and Peripherals
-
-
- Pixhawk Autopilot Bus Interface
- 100 Pin Hirose DF40
- 50 Pin Hirose DF40
-
- Redundant Digital Power Module Inputs
- I2C Power Monitor Support
- 2x – 6 Pin Molex CLIK-Mate
- Power Path Selector w Overvoltage Protection
-
- Voltage Ratings:
- Max input voltage: 6V
- USB Power Input: 4.75~5.25V
-
- Full GPS Plus Safety Switch Port
- 10-Pin JST-GH
-
- Secondary (GPS2) Port
- 6-pin JST-GH
-
- 2x CAN Ports
- 4 Pin JST-GH
-
- 3x Telemetry Ports with Flow Control
- 2x 6-Pin JST-GH
- 1 is connected to Jetson’s UART1 Port
-
- 16 PWM Outputs
- 2x 10-Pin JST-GH
-
- UART4 & I2C Port
- 6-Pin JST-GH
-
- 2x Gigabit Ethernet port
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
- 8-pin JST-GH
- RJ45
-
- AD & IO
- 8-Pin JST-GH
-
- USB 2.0
- USB-C
- 4-pin JST-GH
-
- DSM Input
- 3-pin JST-ZH 1.5mm Pitch
-
- RC in
- PPM SBUS
- 5-pin JST-GH
-
- SPI Port
- External Sensor Bus (SPI5
- 11-Pin JST-GH
-
- 2x Debug Port
- 1 for FMU
- 1 for IO
- 10-Pin JST-SH
-
- Dimensions (Without Jetson and Flight Controller Module)
- 126x80x38mm
-
- Weight
- With Jetson, Heatsink, Flight Controller, M.2 SSD, M.2 Wi-Fi Module 203.2g
-
-
- Input voltage: 3~14S (XT30)
- Output voltage: 6.0V 7.2V 8.0V 9.2V (recommend 7.2V if supplying power to Jetson Board)
- Output Current
- Continuous: 12A
- Burst: 24A
-
- Size: 48×33.6×16.3 mm
- Weight: 47.8g
-
- Full Pinout
- Dimension & Weight
- Flashing Guide
- CAN Setup
- CSI Camera Setup
- MAVLINK Bridge
- Other Reference Link
- CAD File Download
-
Pixhawk 6X (ICM-45686) Flight Controller Module
- Pixhawk Jetson Orin Baseboard
- Nvidia Orin NX (16GB RAM) Nvidia Orin Nano (4GB RAM)
- w Heat Sink & Fan
- Includes the following:
- SSD: Samsung PM9B1 PCIe 4.0 NVMe 512GB
- Wi-Fi & Bluetooth Module: Intel 8265NGW AC Dual Band and Realtek RTL8B22CE
- Camera: IMX219-200
Package Includes
SKU20281 SKU20283 SKU20339 SKU20340
Reference Wiring Diagram
Reference Links
- Full Pinout
UBEC-12A Specifications
-
Autopilot Connectors
- Pixhawk Autopilot Bus Interface
-
- Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)
Baseboard Port & Connection
Jetson Connectors
- 2x Gigabit Ethernet port
-